AIO Diapers

(Example of our newborn AIO diapers)

(Example of our newborn AIO diapers)

AIO  construction

Our AIO diapers can be constructed in several manners. We can use solid PUL for the outside material. We can also use a print fabric. Our print fabrics are mainly cotton wovens. However we do occasionally find cotton knits, polyester wovens or polyester knits to use as well. We take your choice of print fabric and place it over a hidden layer of white PUL to make it waterproof. Please understand that because it is a cotton fabric on the outside. These do have a slight chance of  increase in wicking. Just as any diaper if it's saturated enough it will wick. So will both the prints and the solids. The prints just may wick sooner then the solids will.

*** Coming soon***

Fleece AIO diapers!!! Soon we will be uploading lots of fleece to use in our AIO diapers. We will offer 200 wt with DWR, 300 wt with DWR, Windpro and Windbloc!!! These items will vary based on what we have in stock. But fleece AIO's will be coming to our store in mid October. Just in time for the cold weather!!

Our AIOs are sewn together. Then turned and top stitched for that clean and professional look. We then sew in the leg casings after turning. We feel that leg casing sewn after turning. Increase their purpose to contain any poo your baby will make. No worries about your inside fabric rolling to the out and wicking. No worrying about make sure the legs and fabric are properly positioned. Just place diaper on baby and be confident all those messy diapers will stay messy diapers. Rather then turning into a really messy baby!!

Soaker Info

Our soakers are made with Microfiber.  Microfiber is a WONDERFUL product that absorbs a lot with little bulk. We have sandwiched our soakers. It keeps them from loosing their liquid contents when pressure is applied. Microfiber holds a lot but when compressed by the baby sitting for example. The contents are easily pushed back out of the towel. By sandwiching them you don't have to worry about them leaking all over. We take microfiber and sandwich it between either Sherpa or Hemp fleece!! We then sew your soaker to a body layer of birdseye.  We then add another body layer of birdseye to help "mask" where the soaker is. This way you don't have lines showing on the inside or out from the soaker pad.

You can choose what material your soaker is finished with. You can also choose between a light soaker or heavy soaker. Our light soaker offers 1 layer of microfiber sandwiched between sherpa or hemp fleece. Our heavy soaker offers 3 layers of microfiber sandwiched between sherpa or hemp fleece.

Light soaker provides a trimmer fit without as much absorbancy.

Heavy soaker provides a great absorbancy with a little more bulk.